Vlan Pvid; No Vlan Pvid; Vlan Tagging; No Vlan Tagging - NETGEAR ProSafe GSM7248 User Manual

User Manual for the NETGEAR 7200 Series Layer 2 Managed Switch Software Version 4
Format
Mode

vlan pvid

This command changes the VLAN ID per interface.
Default
Format
Mode

no vlan pvid

This command sets the VLAN ID per interface to 1.
Format
Mode

vlan tagging

This command configures the tagging behavior for a specific interface in a VLAN to enabled. If
tagging is enabled, traffic is transmitted as tagged frames. If tagging is disabled, traffic is
transmitted as untagged frames. The ID is a valid VLAN identification number.
Format
Mode

no vlan tagging

This command configures the tagging behavior for a specific interface in a VLAN to disabled. If
tagging is disabled, traffic is transmitted as untagged frames. The ID is a valid VLAN
identification number.
Format
Mode
Switching Commands
no protocol vlan group all <groupid>
Global Config
1
vlan pvid <1-4094>
Interface Config
no vlan pvid
Interface Config
vlan tagging <1-4094>
Interface Config
no vlan tagging <1-4094>
Interface Config
202-10102-01, May 2005
8-57