Show Interface - NETGEAR ProSafe GSM7248 User Manual

User Manual for the NETGEAR 7200 Series Layer 2 Managed Switch Software Version 4
Machine Model
Serial Number
FRU Number
Part Number
Maintenance Level
Manufacturer
Burned in MAC Address
Software Version
Operating System
Network Processing Element
Additional Packages

show interface

This command displays a summary of statistics for a specific port or a count of all CPU traffic
based upon the argument.
Format
Mode
The display parameters, when the argument is ' <slot/port>', is as follows :
Packets Received Without Error
Packets Received With Error
Broadcast Packets Received
Packets Transmitted Without Error
Transmit Packets Errors
Collisions Frames
Switching Commands
Specifies the machine model as defined by the Vital Product Data.
The unique box serial number for this switch.
The field replaceable unit number.
Manufacturing part number.
Indicates hardware changes that are significant to software.
Manufacturer descriptor field.
Universally assigned network address.
The release.version.revision number of the code currently running on
the switch.
The operating system currently running on the switch.
The type of the processor microcode.
This displays the additional packages that are incorporated into this system,
such as BGP-4 or Multicast.
show interface {<slot/port> | switchport}
Privileged EXEC
The total number of packets (including broadcast packets
and multicast packets) received by the processor.
The number of inbound packets that contained errors preventing
them from being deliverable to a higher-layer protocol.
The total number of packets received that were directed to the
broadcast address. Note that this does not include multicast packets.
The total number of packets transmitted out of the inter-
face.
The number of outbound packets that could not be transmitted because
of errors.
The best estimate of the total number of collisions on this Ethernet seg-
ment.
202-10102-01, May 2005
8-3