No Vlan Protocol Group Add Protocol; Vlan Protocol Group Remove; Protocol Group; No Protocol Group - NETGEAR ProSafe GSM7248 User Manual

User Manual for the NETGEAR 7200 Series Layer 2 Managed Switch Software Version 4
Mode

no vlan protocol group add protocol

This command removes the <
The possible values for protocol are
Format
Mode

vlan protocol group remove

This command removes the protocol-based VLAN group that is identified by this <groupid>.
Format
Mode

protocol group

This command attaches a <vlanid> to the protocol-based VLAN identified by <groupid>. A
group may only be associated with one VLAN at a time, however the VLAN association can be
changed.
The referenced VLAN should be created prior to the creation of the protocol-based VLAN except
when GVRP is expected to create the VLAN.
Default
Format
Mode

no protocol group

This command removes the <vlanid> from this protocol-based VLAN group that is identified by
this <groupid>.
Format
Mode
Switching Commands
Global Config
from this protocol-based VLAN group that is identified by this <
protocol>
and
ip, arp, ipx
no vlan protocol group add protocol <groupid> <proto-
col>
Global Config
vlan protocol group remove <groupid>
Global Config
none
protocol group <groupid> <vlanid>
VLAN database
no protocol group <groupid> <vlanid>
VLAN database
202-10102-01, May 2005
.
.
groupid>
8-55