Dot1X Initialize; Dot1X Login; Dot1X Max-Req; No Dot1X Max-Req - NETGEAR ProSafe GSM7248 User Manual

User Manual for the NETGEAR 7200 Series Layer 2 Managed Switch Software Version 4
Format
Mode

dot1x initialize

This command begins the initialization sequence on the specified port. This command is only valid
if the control mode for the specified port is 'auto'. If the control mode is not 'auto' an error will be
returned.
Format
Mode

dot1x login

This command assigns the specified authentication login list to the specified user for 802.1x port
security. The <user> parameter must be a configured user and the <listname> parameter must be a
configured authentication login list.
Format
Mode

dot1x max-req

This command sets the maximum number of times the authenticator state machine on this port will
transmit an EAPOL EAP Request/Identity frame before timing out the supplicant. The <count>
value must be in the range 1 - 10.
Default
Format
Mode

no dot1x max-req

This command sets the maximum number of times the authenticator state machine on this port will
transmit an EAPOL EAP Request/Identity frame before timing out the supplicant.
Format
Mode
Security Commands
dot1x defaultlogin <listname>
Global Config
dot1x initialize <slot/port>
Privileged EXEC
dot1x login <user> <listname>
Global Config
2
dot1x max-req <count>
Interface Config
no dot1x max-req
Interface Config
202-10102-01, May 2005
9-7