Drop; Redirect; Conform-Color - NETGEAR ProSafe GSM7248 User Manual

User Manual for the NETGEAR 7200 Series Layer 2 Managed Switch Software Version 4
Format
Mode
Incompatibilities

drop

This command specifies that all packets for the associated traffic stream are to be dropped at
ingress.
Format
Mode
Incompatibilities

redirect

This command specifies that all incoming packets for the associated traffic stream are redirected to
a specific egress interface (physical port).
Format
Mode
Incompatibilities Drop

conform-color

This command is used to enable color-aware traffic policing and define the conform-color class
map. Used in conjunction with the police command where the fields for the conform level are
specified. The <class-map-name> parameter is the name of an existing Diffserv class map.
Note: This command may only be used after specifying a police command for the policy-class
instance.
Format
Mode
Quality of Service (QoS) Commands
assign-queue <queueid>
Policy-Class-Map Config
Drop
drop
Policy-Class-Map Config
Assign Queue, Mark (all forms), Police
redirect <slot/port>
Policy-Class-Map Config
conform-color <class-map-name>
Policy-Class-Map Config
202-10102-01, May 2005
10-19