Clear Port-Channel; Clear Traplog; Clear Vlan; Copy - NETGEAR GSM7212 - ProSafe Switch Cli Reference Manual

Command Line Interface Reference for the ProSafe 7200 Series Layer-2 Switches, Software Ver-

15.2.7 clear port-channel

This command clears all port-channels (LAGs).
Format
Mode

15.2.8 clear traplog

This command clears the trap log.
Format
Mode

15.2.9 clear vlan

This command resets VLAN configuration parameters to the factory defaults.
Format
Mode

15.2.10 copy

The command uploads and downloads files to and from the switch. You can upload
copy
and download files from a server by using TFTP, Xmodem, Ymodem, or Zmodem.
Format
Mode
Replace the
<source>
the source or destination, use one of the following values:
<url>
xmodem | ymodem | zmodem | tftp://<ipaddr>/<filepath>/<filename>
For TFTP, the
to the file, and
Table 15-1. Copy Parameters
Source
nvram:clibanner
nvram:errorlog
nvram:log
nvram:script
<scriptname>
System Maintenance Commands
clear port-channel
Privileged EXEC
clear traplog
Privileged EXEC
clear vlan
Privileged EXEC
copy <source> <destination>
Global Config
and
<destination>
parameter is the IP address of the server,
<ipaddr>
is the name of the file you want to upload or download.
<filename>
Destination
<url>
<url>
<url>
<url>
v1.0, February 2007
parameters with the options in
Description
Copies the CLI banner to a server.
Copies the error log file to a server.
Copies the log file to a server.
Copies a specified configuration
script file to a server.
Table 15-1. For
is the path
<filepath>
15-19