Dell E56S Series Installation And Service Manual page 61

Figure 41. Installing a 2.5-inch drive into a 3.5-inch drive adapter
Removing a 3.5-inch drive adapter from a 3.5-inch drive carrier
Prerequisites
1. Follow the safety guidelines listed in
Steps
1. Using a Phillips #1 screwdriver, remove the screws from the rails on the drive carrier.
2. Lift the 3.5-inch drive adapter out of the 3.5-inch drive carrier.
Figure 42. Removing a 3.5-inch drive adapter from a 3.5-inch drive carrier
Safety Instructions.
Installing and removing system components 61