Table of Contents
Advertisement
Figure 38. Removing the drive from the drive carrier
Next steps
If applicable,
install a drive into the drive
Installing a drive into the drive carrier
Prerequisites
CAUTION:
Mixing drive carriers from other generations of XC systems is not supported.
NOTE:
When installing a drive into the drive carrier, ensure that the screws are torqued to 4 inch-pounds.
Steps
1. Insert the drive into the drive carrier with the connector end of the drive towards the back of the carrier.
2. Align the screw holes on the drive with the screws holes on the drive carrier.
3. Using a Phillips #1 screwdriver, replace the screws to secure the drive to the drive carrier.
Figure 39. Installing a drive into the drive carrier
carrier.
Installing and removing system components
59
Advertisement
Table of Contents
