Table of Contents
Advertisement
Steps
Align the PSU blank with the PSU bay and push it into the PSU bay until it clicks into place.
Figure 102. Installing a power supply unit blank
Next steps
Follow the procedure listed in
Removing a power supply unit
The procedure for removing AC and DC PSUs is identical.
Prerequisites
CAUTION:
The system needs one power supply unit (PSU) for normal operation. On power-redundant systems, remove
and replace only one PSU at a time in a system that is powered on.
1. Follow the safety guidelines listed in
2. Disconnect the power cable from the power source and from the PSU you intend to remove, and then remove the cable from the
strap on the PSU handle.
Steps
Press the release latch and slide the PSU out of the system by using the PSU handle.
Figure 103. Removing a power supply unit
Next steps
Replace a power supply
unit.
112
Installing and removing system components
After working inside your
system.
Safety
Instructions.
Advertisement
Table of Contents
