Table of Contents
Advertisement
Next steps
1.
Install the internal PERC
2.
Install the air
shroud.
3.
Close the drive
bays.
4. Install the
system
cover.
5. Place the system into the rack. For more information, see the Rail Installation Guide at www.dell.com/xcseriesmanuals.
6. Install the
power supply
7.
Open the drive
bays, install
8. If removed,
install the front
9. Follow the procedure listed in
134
Installing and removing system components
card.
units.
all
drives, and then
close the drive
bezel.
After working inside your
bays.
system.
Advertisement
Table of Contents
