Table of Contents
Advertisement
Option
Description
Redundant OS
Sets the redundant OS information for redundant OS control.
Control
Miscellaneous
Provides options to change the system date and time.
Settings
System Information
You can use the System Information screen to view system properties such as Service Tag, system model name, and BIOS version.
Viewing System Information
To view the System Information screen, perform the following steps:
Steps
1. Power on or restart your system.
2. Press F2 immediately after you see the following message:
F2 = System Setup
NOTE:
If your operating system begins to load before you press F2, wait for the system to finish booting, and then
restart your system and try again.
3. On the System Setup Main Menu screen, click System BIOS.
4. On the System BIOS screen, click System Information.
System Information details
About this task
The System Information screen details are explained as follows:
Option
Description
System Model
Specifies the system model name.
Name
System BIOS
Specifies the BIOS version installed on the system.
Version
System
Specifies the current version of the Management Engine firmware.
Management
Engine Version
System Service
Specifies the system Service Tag.
Tag
System
Specifies the name of the system manufacturer.
Manufacturer
System
Specifies the contact information of the system manufacturer.
Manufacturer
Contact
Information
System CPLD
Specifies the current version of the system complex programmable logic device (CPLD) firmware.
Version
Secondary System
Specifies the current version of the system complex programmable logic device (CPLD) firmware.
CPLD Version
UEFI Compliance
Specifies the UEFI compliance level of the system firmware.
Version
Pre-operating system management applications
19
Advertisement
Table of Contents
