Honeywell Thor VM1 User Manual page 82

Auto-On Control Wiring Diagram
Auto-On must be selected on the
should be made to vehicle switched power to allow the terminal to automatically power-
up when vehicle power is switched on or when the power switch on the back of the dock
is placed in the On position. The Ignition wire is not used and should be left discon-
nected.
Existing Circuitry On Vehicle
Fuse - See
Warning
statement below
Caution: For battery powered vehicles:
•
•
•
Caution: For internal combustion engine powered vehicles:
•
•
•
72
Battery
Main Switch
+Vo -Vo
See Caution statement below
Red wire is connected to battery positive. If there is a red wire and a red/white wire,
twist them together and connect to battery positive.
Black wire must be connected to battery negative. If there is a black wire and a black/
white wire, twist them together and connect to battery negative.
Green wire must be connected to the vehicle chassis ground.
Red wire is connected to battery positive. If there is a red wire and a red/white wire,
twist them together and connect to battery positive.
Black wire must be connected to battery negative. If there is a black wire and a black/
white wire, twist them together and connect to battery negative.
Green wire is connected to the vehicle chassis ground, which can also be battery
negative.
Thor VM1 with Microsoft Windows Embedded Standard 2009 User Guide
AutoOn control panel. The vehicle supply connections
Cable for optional
screen blanking
connection
Red/White (if present)
Black/White (if present)
(not connected)
Quick Mount
Smart Dock
COM1 or COM2
Connector
Red
Circular
Power
Black
Connector
Green
Blue
.