Honeywell Thor VM1 User Manual page 84

Manual Control Wiring Diagram
Ignition wire must be left unconnected Standard must be selected from the
control panel.
Existing Circuitry On Vehicle
Fuse - See
Warning
statement below
Caution: For battery powered vehicles:
•
•
•
Caution: For internal combustion engine powered vehicles:
•
•
•
74
Battery
Main Switch
+Vo -Vo
See Caution statement below
Red wire is connected to battery positive. If there is a red wire and a red/white wire,
twist them together and connect to battery positive.
Black wire must be connected to battery negative. If there is a black wire and a black/
white wire, twist them together and connect to battery negative.
Green wire must be connected to the vehicle chassis ground.
Red wire is connected to battery positive. If there is a red wire and a red/white wire,
twist them together and connect to battery positive.
Black wire must be connected to battery negative. If there is a black wire and a black/
white wire, twist them together and connect to battery negative.
Green wire is connected to the vehicle chassis ground, which can also be battery
negative.
Thor VM1 with Microsoft Windows Embedded Standard 2009 User Guide
Cable for optional
screen blanking
connection
Red/White (if present)
Red
Black/White (if present)
Black
Green
Blue
(not connected)
AutoOn
Quick Mount
Smart Dock
COM1 or COM2
Connector
Circular
Power
Connector