Honeywell Thor VM1 User Manual page 144

Reconnect
Note: These options can still be checked or unchecked whether Bluetooth connection is enabled
or disabled.
Options
Option
Report when
connection lost
Report when
reconnected
Report failure to
reconnect
Clear Pairing Table on
Boot
Auto Reconnect on
Boot
134
Function
This option is Enabled (checked) by default.
There may be an audio or visual signal when a connection between a paired,
active device is lost.
A visual signal may be a dialog box placed on the display notifying the user the
connection between one (or all) of the paired Bluetooth devices has stopped.
Tap the OK button to remove the dialog box from the screen.
This option is Disabled (unchecked) by default.
There may be an audio or visual signal when a connection between a paired,
active device is made.
A visual signal may be a dialog box placed on the display notifying the user the
connection between one (or all) of the paired Bluetooth devices has resumed.
Tap the OK button to remove the dialog box from the screen.
This option is Enabled (checked) by default.
The default time delay is 30 minutes. This value cannot be changed by the user.
There may be an audio or visual signal when a connection between a paired,
active device fails to re-connect. A visual signal may be a dialog box placed on
the display notifying the user the connection between one (or all) of the
previously paired Bluetooth devices has failed.
Tap the X button or OK button to close the dialog box.
Possible reasons for failure to reconnect: Timeout expired without reconnecting;
attempted to pair with a device that is currently paired with another device;
attempted to pair with a known device that moved out of range or was turned off;
attempted to pair with a known device but the reason why reconnect failed is
unknown.
This option is Disabled (unchecked) by default.
When enabled (checked), all previous paired information is deleted upon any
reboot sequence and no devices are reconnected.
When enabled (checked) "Auto Reconnect on Boot" is automatically disabled
(dimmed).
This option is Enabled (checked) by default. All previously paired devices are
reconnected upon any reboot sequence.
When disabled (unchecked), no devices are reconnected upon any reboot
sequence.
Thor VM1 with Microsoft Windows Embedded Standard 2009 User Guide