Honeywell Thor VM1 User Manual page 128

6. Carefully lift the front panel away from the device.
7. Position the replacement front panel so the tab on the back of the front panel lines
8. Position the replacement front panel so wiring connector on the back of the front
9. Gently press the front panel into place.
10. Tighten the fourteen (14) captive M3 screws. In the order shown in the top figure
11. Reinstall the Thor VM1 in the dock.
12. When the Thor VM1 is placed in the powered dock, the UPS battery automatically
13. Restart the Thor VM1.
14. When restarted, the Thor VM1 automatically recognizes the keyboard type (12 or 64
15. The Thor VM1 is ready for use.
118
Slot on
Wiring Connector
Thor VM1
on Thor VM1
up with the slot on the Thor VM1. Be sure the two wiring connectors are also aligned.
panel lines up with the connector on the Thor VM1.
above, use a #2 Phillips bit and torque the screws to 6-7 inch pounds.
reconnects.
keys).
Thor VM1 with Microsoft Windows Embedded Standard 2009 User Guide
Slot on
Wiring Connector
Front Panel
on Front Panel