Honeywell Thor VM1 User Manual page 185

10. If using EAP FAST and manual PAC provisioning, input the PAC filename and
11. Click the OK button then the Commit button.
12. If changes are made to the stored credentials, click Commit to save those changes
13. Verify the device is authenticated by reviewing the Status tab. When the device is
Note: See
Note: If invalid credentials are entered into the stored credentials, the authentication will fail. No
error message is displayed. The user may or may not be prompted to enter valid
credentials.
To Use Sign On Screen
1. After completing the other entries in the profile, click on the Credentials button.
2. For PEAP-MSCHAP and PEAP-GTC, importing the CA certificate into the Windows
3. For EAP-TLS, import the CA certificate into the Windows certificate store. Also
4. Access the Credentials screen again. Make sure the Validate server and Use MS
5. The default is to use the entire certificate store for the CA certificate. Alternatively,
6. For EAP-TLS, also enter the User Cert (User Certificate filename) on the credentials
7. Click the OK button then the Commit button.
8. When the device attempts to connect to the network, a sign-on screen is displayed.
9. Enter the Username and Password. Click the OK button.
10. Verify the device is authenticated by reviewing the Status tab. When the device is
Thor VM1 with Microsoft Windows Embedded Standard 2009 User Guide
password.
before making any additional changes to the profile or global parameters.
property configured, the Status tab indicates the device is Authenticated and the
method used.
Configuring the Profile
Leave the Username and Password blank. No entries are necessary on the Creden-
tials screen for LEAP or LEAP/WPA.
certificate store is optional.
import the User Certificate into the Windows certificate store.
store checkboxes are checked.
use the Browse button next to the CA Cert (CA Certificate Filename) on the
Credentials screen to select an individual certificate.
screen by using the Browse button.
property configured, the indicates the device is Authenticated and the method
used.
for more details.
175