Install U Bracket Mount; Components - U Bracket Mounting Assembly - Honeywell Thor VM1 User Manual

Install U Bracket Mount

Note: This mounting system does not have a provision for an integrated scanner holder. This
accessory can be mounted remotely if desired. Contact
Caution: This device is intended to transmit RF energy. For protection against
Before installation begins, verify you have the applicable vehicle mounting bracket
assembly components necessary, as shown in the following figures.

Components - U Bracket Mounting Assembly

The U bracket kit is available in two configurations:
•
•
60
RF exposure to humans and in accordance with FCC rules and
Industry Canada rules, this transmitter should be installed such that
a minimum separation distance of at least 20 cm (7.8 in.) is
maintained between the antenna and the general population. This
device is not to be co-located with other transmitters.
With a U Bracket included for new vehicle installations
Without a U Bracket for installing the Thor VM1 in place of a previous Honeywell
vehicle mounted computer, such as a VX6 or VX7.
◦ U Bracket (only necessary for new
installations)
◦ Adapter Bracket (includes screws, flat
washers and lock washers to attach Adapter
Bracket to Thor VM1 and to U Bracket). The U
bracket may already be installed on the
vehicle where a VX1, VX2, VX4, VX5, VX6 or
VX7 was previously installed.
Thor VM1 with Microsoft Windows Embedded Standard 2009 User Guide
Technical Assistance for details.