Chapter 6 - Wireless Network Connections; Network Connections Control Panel - Honeywell Thor VM1 User Manual

CHAPTER
6
WIRELESS NETWORK
CONNECTIONS

Network Connections Control Panel

For best results, do not use the Network Connections panel (Start > Control Panel >
Network Connections) to disable the Summit wireless adapter. Due to a limitation of
the system architecture, if the Summit wireless adapter is disabled in the Network Con-
nections panel, it cannot be re-enabled from this control panel. Instead, the Thor VM1
must be rebooted to enable the Summit wireless adapter.
The Device Manager (Control Panel > System > Hardware > Device Manager) can be
used to disable and enable the Summit wireless adapter without rebooting the Thor
VM1.
Thor VM1 with Microsoft Windows Embedded Standard 2009 User Guide 157