Port And Connector Pinouts; Power Supply Connector - Honeywell Thor VM1 User Manual

Port and Connector Pinouts

Power Supply Connector

VM1D Standard Dock and VM3D Enhanced Dock
4
3
2
VMXD Enhanced Dock
4
3
2
Thor VM1 with Microsoft Windows Embedded Standard 2009 User Guide
Pin Signal Description
1 V In+ 10-60V DC input +
5
2 V In+ 10-60V DC input +
6
3 V In- input -
1
4 V In- input -
5 GND Chassis ground
6 Ignition +0V to 60V to start terminal
Pin Signal Description
1 V In+ 13.2V DC Input + provided by DC/DC power supply
5
2 V In+ 13.2V DC Input + provided by DC/DC power supply
6
3 V In- Input -
1
4 V In- Input -
5 COM1 Screen Blanking Box + The green wire in the power cable must be
RTS connected to the switched side of the screen blanking box. See
the applicable wiring diagram below.
6 COM1 Screen Blanking Box - The white wire in the power cable must be
CTS connected to the unswitched side of the screen blanking box. See
applicable wiring diagram below.
Cable shell provides chassis ground connection.
239