Connect Canbus Cable - Honeywell Thor VM1 User Manual

Connect CANbus Cable

The CANbus/Audio connector supports a headset adapter cable or a CANbus Y cable.
The Thor VM1 does not support connecting audio and CANbus simultaneously.
See
1. Seat the D15 cable end connector firmly over the CANbus/Audio Connector on the
2. Tighten the thumbscrews in a clockwise direction. Do not over tighten.
3. The CANbus Y cable has a 9 pin F SAE J1939 (Deutsch) and 9 pin M SAE J1939
106
CANbus / Audio Connector
dock.
(Deutsch) connector. Connect the appropriate cable connector as needed.
Thor VM1 with Microsoft Windows Embedded Standard 2009 User Guide
for connector pinouts.