Honeywell Thor VM1 User Manual page 137

Auto-On
The Thor VM1 automatically powers up when power is provided. This could be from
switched vehicle power, the power switch on the dock being placed in the On position or
external AC power being applied.
•
•
No action occurs when the power source is disconnected.
Note: When the UPS battery has been depleted or disconnected (the Thor VM1 is first powered
out of the box, the front panel has been replaced, etc.) power the Thor VM1 manually by
pressing the power button. After the initial power up, the Thor VM1 powers on
automatically when power is attached and Auto-On is enabled.
Thor VM1 with Microsoft Windows Embedded Standard 2009 User Guide
The power switch on the dock must be On for external power to control the device.
The Ignition Input wire, which is part of the DC Power Cable, is left disconnected.
127