Honeywell Thor VM1 User Manual page 62

1. Determine the position for mounting the RAM ball base. Be sure to position the RAM
2. Attach the RAM ball base to the vehicle mounting surface using three or four 1/4
Mounting Dimensions
Note: Drill and tap holes for three 1/4 bolts. Drawing not to scale.
3.69" / 93.73 mm
52
bracket to allow access to the switches and ports on the bottom of the Thor VM1.
bolts (not included) or equivalent fasteners. If the mounting kit includes cone
washers, use those as illustrated below.
IMPORTANT: Mount to the most rigid surface available.
60º 60º
120º
Thor VM1 with Microsoft Windows Embedded Standard 2009 User Guide
2.75" / 69.85 mm
120º