Replace Front Panel
Front Panel Options
The front panel of the Thor VM1 is field replaceable. The front panel assembly contains
the keypad, touch screen and optional defroster. Should any of these components fail,
the front panel assembly can easily be replaced to reduce downtime. The replacement
front panel is available in these configurations:
•
Equipment Required
The following equipment is user-supplied:
•
•
Replacement Procedure
Caution: Before replacing the Thor VM1 front panel,
1. Place the Thor VM1 on a clean, well-lit sur-
2. Shutdown the Thor VM1.
3. Remove the Thor VM1 from the dock.
4.
5. Loosen the fourteen (14) captive M3 screws
Thor VM1 with Microsoft Windows Embedded Standard 2009 User Guide
64-key ANSI keyboard with standard touch screen or cold storage touch screen
Torquing tool capable of measuring inch pounds
#2 Phillips screwdriver bit
Battery.
face before performing the front panel
replacement.
Disconnect UPS
Battery.
holding the front panel. Use a #2 Phillips
bit.
Disconnect UPS
2
7
9
5
1
3
11
13
4
6
10
8
12
14
117