Replace Ups Battery; Equipment Required; Replacement Procedure - Honeywell Thor VM1 User Manual

Replace UPS Battery

The UPS battery in the Thor VM1 is field replaceable. Should the UPS battery fail, it can
easily be replaced to minimize downtime.

Equipment Required

The following equipment is user-supplied:
•
•

Replacement Procedure

Caution: Before replacing the Thor VM1 UPS battery,
1. Place the Thor VM1 on a clean, well-lit
2. Shutdown the Thor VM1.
3. Remove the Thor VM1 from the dock.
4.
5. Loosen the twelve (12) captive M3
6. Carefully lift the front panel away
7. Note the orientation of the UPS
Thor VM1 with Microsoft Windows Embedded Standard 2009 User Guide
Torquing tool capable of measuring inch pounds
#2 Phillips screwdriver bit
Battery.
surface before performing the UPS
battery replacement.
Disconnect UPS Battery.
screws holding the front panel. Use a
#2 Phillips bit.
from the device.
battery. Lift the UPS battery out of the
battery well and place it outside the
well. Do not pull on the wires
attaching the battery to the Thor VM1
while lifting the battery.
Disconnect UPS
2
7
9
5
1
11 13
UPS
Wiring
Battery
Connector
4
6
10
8
3
12
14
Foam
Pads
119