6. Provide mechanical support for the cable by securing it to the vehicle structure at
7. Connect the watertight connector end of the power cable to the Thor VM1 dock
8. Secure the power cable to the Thor VM1 using the
9.
10. If using the
11. Press the
12. Press the
88
approximately one foot intervals, taking care not to over tighten and pinch conduc-
tors or penetrate outer cable jacket.
power connector by aligning the connector pins to the power connector; push down
on the watertight connector and twist it to fasten securely.
Place Thor VM1 in the
Screen Blanking
previously installed.
Power Switch
Power Button
Thor VM1 with Microsoft Windows Embedded Standard 2009 User Guide
Dock.
feature, install the screen blanking box or switch if not
on the back of the Thor VM1 dock.
on the front of the Thor VM1 to turn on the Thor VM1.
Strain Relief Cable
Clamps.