Replace Front Panel - Honeywell Thor VM1 User Manual

Replace Front Panel

Front Panel Options
The front panel of the Thor VM1 is field replaceable. The front panel assembly contains the keyboard, touch screen and
optional defroster. Should any of these components fail, the front panel assembly can easily be replaced to reduce down-
time. The replacement front panel is available in several configurations:
• 64-key ANSI keyboard with standard touch screen or cold storage touch screen
• 64-key 3270 keyboard with standard touch screen or cold storage touch screen
• 64-key 5250 keyboard with standard touch screen or cold storage touch screen
• 12-key keyboard with standard touch screen or cold storage touch screen
Equipment Required
The following equipment is user-supplied:
• Torquing tool capable of measuring inch pounds
• #2 Phillips screwdriver bit
Replacement Procedure
CAUTION - Before replacing the Thor VM1 front panel,
1. Place the Thor VM1 on a clean, well-lit surface before perform-
ing the front panel replacement.
2. Place the Thor VM1 in Suspend by pressing the Power button.
3. Remove the Thor VM1 from the Quick Mount Smart Dock.
4. Disconnect UPS Battery
5. Loosen the fourteen (14) captive M3 screws holding the front
panel. Use a #2 Phillips bit.
6. Carefully lift the front panel away from the device
4 - 44
(page 4-41).
Disconnect UPS Battery (page 4-41).
7
9
5
11
2 4
1 3
13 12
6
10
8
14