Figure 3-33: Anchoring Wire Probes; Figure 3-34: Wire Probe Slack - Honeywell SLG 700 User Manual

Figure 3-33: Anchoring wire probes

When anchoring a wire probe it is recommended that the wire be slack to prevent
excessive tensile loading from motion of medium and/or thermal expansion. The sag
should be ~1cm/m (1.5"/10') of the probe length. See Figure 3-34.

Figure 3-34: Wire probe slack

SLG 700 SmartLine Level Transmitter User's Manual
Page 72 Revision 7