Honeywell SLG 700 User Manual page 22

Enhanced Device Description (EDD)
There are two types of EDDs are available, namely .ff5/.sy5 and .ffo/sym. The .ffo/.sym
binary files are generated for the legacy hosts to load the device DD that is generated using
latest tokenizer. Few constructs like Images that are supported in .ff5/.sy5 binaries, are not
supported in .ffo/.sym binary files.
Device Type Manager (DTM)
DTM is similar to a device driver that enables usage of devices in all the asset management
and device configuration software like FDM or PACTware, with the help of the FDT-DTM
technology.
The DTM has the following primary functions:

Provides a graphic user interface for device configuration.

Provides device configuration, calibration, and management features for the
particular device.
DTM provides functions for accessing device parameters, configuring and operating the
devices, calibrating, and diagnosing problems.
Download DTM from:
US/explore/products/instrumentation/process-level-sensors/Pages/smartline-level-
transmitter.aspx
Go to Software tab
To set up the DTM on the FDM/Experion refer to the FDM/Experion User Guide.
Figure 2-4 shows an example of a FF network setup.
For more information on Experion go to:
https://www.honeywellprocess.com/integrated-control-and-safety-systems/experion-pks/
Page 10
https://www.honeywellprocess.com/en-
SLG 700 SmartLine Level Transmitter User's Manual
Revision 7