Honeywell SLG 700 User Manual page 102

Display Config" sub-menu, continued ..
<Return>
Screen Format
(FF read only)
Trend Hours
(FF read only)
PV Selection
(FF read only)
Screens 1-8
Display Units
(FF read only)
Custom Units
(FF read only)
Decimals
(FF read only)
Page 90
None
PV
PV & Bar Graph
PV & Trend
##
Product Level
% Prod Level
Dist To Prod
Prod Lvl Rate
Product Volume
Vapor Thick
% Vapor Thick
Vapor Volume
Intf Level
% Intf Level
Dist To Intf
Intf Lvl Rate
Upr Prod Thick
Lower Prod Vol
Upper Prod Vol
Loop Output
Percent Output
Level, Interface &
Distance:
ft, in, m, cm, mm
Volume:
3 3
ft , in , US gal, Imp gal,
3
bbl oil, bbl liq, yd
liters
Level Rate:
ft/s, ft/m, m/s, in/min, m/h
Internal temp:
°F, °C
None
X.X
X.XX
X.XXX
SLG 700 SmartLine Level Transmitter User's Manual
Select the Screen
format from the list.
Select the amount of
historic data visible on
the Trend screen.
Range: 1 to 999 hours.
Applies to the "PV &
Trend" format only
Select the Process
Variable (PV) to be
shown on screen.
Choices based on
Measure Product and
Volume Calc Type.
Select the Display
Units for the selected
PV.
3
, m ,
Enter Custom Units
using any
alphanumeric value up
to 14 characters long.
Select the decimal
resolution for the PV.
Press  to enter
menu selection
 and  to select
from list
Press  to enter
menu selection
 and  to select
from list.
Read only
Press  to enter
menu selection
 and  to select
from list.
 to enter
Revision 7