Table 4-9: Advanced Displays With Pv Format Display Indications - Honeywell SLG 700 User Manual

Table 4-9: Advanced Displays with PV Format Display Indications

Display Indicator
Diagnostic
Maintenance
PV Value
Revision 7
Diagnostic condition present
This indicator is displayed any time a diagnostic is present in the
transmitter, either Critical or Non-Critical.
To determine which Non-Critical diagnostics are active, use the local
buttons to call up the Non-Critical diagnostics menu.
Refer to
Table 4-8: Monitor sub-menu for details.
If a Critical Diagnostic is present, the message Critical Diag will flash in
the top of the screen and the appropriate Diagnostic screen will be
inserted into the normal screen rotation.
Maintenance Mode is active
This indicator is set by the Experion DCS. When this Mode is active, a
screen with the text Available for Maintenance will be inserted into the
normal screen rotation to make it easy to identify transmitters that are
available for maintenance.
User Configurable. This field has 7 characters.
Maximum allowable numeric value of 9999999 or -999999.
If fractional decimals are configured, the fractional positions will be
dropped as required.
If the PV exceeds the values above limits, the PV is divided by 1000 and
K is appended to the result, allowing a maximum value with multiplier of
999999K or -99999K
SLG 700 SmartLine Level Transmitter User's Manual
Description
Page 105