9.1 Safety Instrumented Systems (SIS) Installations
For Safety Certified Installations, please refer to SLG 700 Safety Manual, document
#34-SL-25-05 for installation procedure and system requirements.
9.2 European Directive Information (EU)
The SLG 700 Transmitter complies with the following directives.
2014/30/EU
ATEX 2014/34/EU
2014/68/EU
The SLG 700 Transmitter complies with the following EMC standards
Directive
EN 61326-1
EN 61326-3-1
EN 55011, CISPR 16-1
and CISPR 16-2
NAMUR NE21
(HART / 4-20mA only)
The SLG 700 transmitter complies with the radiated immunity requirements when a coax
probe is used OR with any probe when the device is installed in a metallic vessel or stillwell.
When the device is installed on an open-air tank or non-metallic tank the electromagnetic
emissions levels will remain compliant with any probe, however, a coax probe is
recommended if a strong electromagnetic field may be present near the probe.
A copy of the SLG 700 EU Declaration of Conformity can be downloaded here:
https://www.honeywellprocess.com/library/support/Public/Documents/50099165.pdf
Page 146
9 Appendix Certifications
Directive
Electromagnetic Compatibility (EMC)
Explosion Protection Regulation (where
applicable)
Pressure Equipment Directive (PED)
General EMC requirements for Electrical
equipment for measurement, control, and
laboratory use
Functional Safety EMC requirements for
Electrical equipment for measurement,
control, and laboratory use
Emissions of radio frequencies
Electromagnetic compatibility of industrial
process and laboratory control equipment
SLG 700 SmartLine Level Transmitter User's Manual
Description
Description
Revision 7