System Health Report - Cisco BTS 10200 Troubleshooting Manual

Chapter 15 Diagnostic Tests

System Health Report

System Health Report
The System Health Report (system-health) (SHR) allows the retrieval of the status of various processes
within the BTS 10200.
Use the following command example to run a SHR immediately:
CLI>report system-health period=720;
PERIOD The amount of time to collect back to in hours. INTEGER: 1–720 (Default = 24).
The SHR command can be used in conjunction with the command scheduler. Using the command
scheduler, the SHR runs at periodic intervals collecting the last 24 hours (configurable) worth of data.
Upon initial installation and startup, there is an SHR command already scheduled to execute at midnight
every 24 hours.
To schedule multiple SHR command(s) at different times, the command scheduler add command can
be issued multiple times:
CLI>add scheduled-command verb=report; noun=system-health; <recurrence=DAILY>;
<start-time=...>; <keys=period>; <values=...>
Use the following command to remove any scheduled SHR command(s):
CLI>delete scheduled-command id=NNN
Use the following command to obtain an ID number and view the list of scheduled command(s):
CLI>show scheduled-command verb=report; noun=system-health
To reschedule an SHR command for another time, change the recurrence, or change the collection
period, use the following command:
CLI>change scheduled-command id=NNN; <recurrence=DAILY>; <start-time=...>; <keys=period>;
<values=...>
Cisco BTS 10200 Softswitch Troubleshooting Guide, Release 5.0.x
15-52
OL-8723-19