Keyboard Leds; 2Nd Led; Shift Leds; Ctrl Led - Honeywell Thor VM1 User Manual

Keyboard LEDs

The keyboard LEDs are located near the specified key.

2nd LED

LED Behavior
Solid Green
Off

Shift LEDs

For the 12-key keyboard, there is a single Shift key and a single LED.
For the 64 key keyboard, there is one LED next to each Shift key. Both LEDs indicate the status of Shift mode and
Caps Lock mode.
LED Behavior
Blinking Green
Solid Green
Off

Ctrl LED

The Ctrl key is not present on the 12-key keypad.
LED Behavior
Solid Green
Off

Alt LED

The Alt key is not present on the 12-key keypad.
LED Behavior
Solid Green
Off

Display

The display is a thin-film transistor display capable of supporting WSVGA graphics modes. Display size is 800 x 480 pixels.
The display covering is designed to resist stains. The touch screen allows signature capture and touch input. The display sup-
ports screen blanking to eliminate driver distraction when the vehicle is in motion.

Touch Screen

The touch screen is a Resistive Panel with a scratch resistant finish that can detect touches by a stylus, and translate them
into computer commands. In effect, it simulates a computer mouse. Only Delrin or plastic styluses should be used. A right
mouse click is simulated by touching and holding the screen for the appropriate time interval.
When a dialog box is too large for the display, tap and drag the dialog box up or down or from side to side to view the
remainder of the dialog box.
Status
• Indicates the 2nd modifier key is active. 2nd mode is invoked for the next keypress only.
• Pressing the 2nd key a second time exits this modifier mode and turns off the LED.
2nd mode is not invoked.
Status
• Indicates the keypad is in Shift mode. Shift mode is invoked for one keypress.
• Pressing the Shift key places the system in Shift mode.
• To exit Shift mode, press the Shift key again.
• When solid Green, indicates the keypad is in Caps Lock mode. Caps Lock mode is
invoked until canceled.
• Pressing the 2nd key followed by the Shift key places the system in Caps Lock mode.
• To exit Caps Lock mode, press 2nd + Shift again.
Neither Shift or Caps Lock mode is invoked.
Status
• Indicates the Ctrl modifier key is active. Ctrl mode is invoked for the next keypress only.
• Pressing the Ctrl key a second time exits this modifier mode and turns off the LED.
Ctrl mode is not invoked.
Status
• Indicates the Alt modifier key is active. Alt mode is invoked for the next keypress only.
• Pressing the Alt key a second time exits this modifier mode and turns off the LED.
Alt mode is not invoked.
3 - 15