Rf Safety Notice; Bluetooth; Honeywell Scanning & Mobility Product Environmental Information; Ce Mark - Honeywell Thor VM2 User Manual

RF Safety Notice

This device is intended to transmit RF energy. For protection against RF exposure to humans and in accordance with
FCC rules and Industry Canada rules, this transmitter should be installed such that a minimum separation distance of at
least 20 cm (7.8 in.) is maintained between the antenna and the general population. This device can only be co-located
with FCC ID:TWG-SDCPE15N.

Bluetooth

Class II
Honeywell Scanning & Mobility Product Environmental Information
Refer to www.honeywellaidc.com/environmental

CE Mark

The CE marking on the product indicates that this device is in conformity with the following directives:
• 1999/5/EC R&TTE
• 2011/65/EU RoHS (Recast)
In addition, complies to 2006/95/EC Low Voltage Directive, when shipped with recommended power supply.
European contact:
Hand Held Products Europe BV
Lagelandseweg 70,
6545CG Nijmegen
The Netherlands
Honeywell shall not be liable for use of our product with equipment (i.e., power supplies, personal computers, etc.) that is not CE
marked and does not comply with the Low Voltage Directive.
This device complies with the following harmonized European Standards:
Health: EN63211:2008
Safety: EN60950-1:2006 + A1:2010 + A11:2009 + A12:2011
EMC: EN301 489-1 V1.9.2:2011, EN301 489-17 V2.1.1:2009
Radio: EN300 328 V1.7.1:2006
The following CE marking is valid for EU harmonized telecommunications products.
EN300328 V1.7.1:2006
EN301893 V1.6.1:2011
EN62311: 2008
EN301489-1 V1.9.2:2011
EN301489-17 V2.1.1:2009
EN55022/EN55024: 2010
0560
for the RoHS / REACH / WEEE information.
Part
Number
1 - 3