Configuring Smtp Server Settings - Toshiba GL-1010 Administrator's Manual

8 Enter a
9 Enter a
10 Click
Note: Once the controller establishes connection with the e-mail
server, it receives any sent e-mail and the e-mail is deleted at the
e-mail server.

Configuring SMTP Server Settings

1 Log in as an administrator.
2 Click the Administration tab.
3 Click the Setup subtab.
4 Click the
5 Enter the SMTP
6 Enter the
7 Enter the
8 Enable or disable
9 If enabled, enter a
SMTP Authentication
in Admin Setup
Enabled
Enabled
Disabled
Disabled
132
.
Password
POP3 Port Number
.
Save
link. The E-mail page opens.
E-mail
Server IP Address
Mail Domain Name
SMTP Port Number
SMTP Authentication
Username
SMTP Authentication in
E-mail/iFax Scan Agent
Enabled
Disabled
Enabled
Disabled
.
. For example, GL.123.net or ABC.123.com.
.
.
and . The following rules apply:
Password
Prompts user for SMTP Username and SMTP
Password. The user name and password are
defaulted, but can be changed. They are
authenticated before the scan process begins.
Prompts user for SMTP Username and SMTP
Password. The user name and password are
defaulted, but can be changed. They are
authenticated before the scan process begins.
Prompts user for SMTP Username and SMTP
Password. The defaults are blank. The user
can enter the user name and password and
they are authenticated before the scan process
begins.
Does not prompt the user for the SMTP
Username and SMTP Password. No
authentication occurs before the scan process
begins.
GL-10x0
Action
Administrator's Guide