Toshiba GL-1010 Administrator's Manual page 72

7 Remove the CD-ROM and press
8 When communications with the copier resume, a test page prints out
on the copier and the front panel becomes operational again. The
controller software version printed on the test page should match the
update version. If so, the system update has completed successfully.
If you experience problems during the update process, or if the
system does not come back online after the update process
completes, contact your Toshiba authorized dealer for support.
Printing Software Patch List
You can print the software patch list from the control panel to review the
installed updates to the controller software. The manage patches, use
TopAccess.
1 From the copier LCD panel, press the
press the P
2 Press the T
3 Press the P
MFP.
Update with New or Localized Printer Drivers
The controller does not come with localized printer drivers pre-installed.
The printer drivers that are pre-installed in the controller are U.S.
English. When new drivers are released periodically or if users want to
download the localized drivers from the controller, you must first install
them from the e-STUDIO Client CD-ROM.
1 From the copier LCD panel, press the
press the
50
tab. The Print tab opens.
RINT
button. The Test Pages page opens.
P
EST AGES
button. The list of installed patches prints on the
L
ATCH IST
tab.
ADMIN
. The controller reboots.
OK
PRINTER/NETWORK
PRINTER/NETWORK
GL-10x0 Administrator's Guide
key and then
key and then