Inserter Paper Orientation
You can select face up or face down inserter paper orientation using the
following option.
Option Value
insertinv=off
insertinv=on
If this option is not specified, the default value, face up, will be used.
The command to select face down inserter paper orientation is lp –o
insertinv=on <filename>.
Tab Paper Source
You can select the paper source for tabbed paper using the following
option.
Option Value
tabsource=lower
tabsource=bypass
If you do not specify this option, the printer default value is used.
The command to use the lower tray to feed tabbed paper is lp –o
tabsource=lower <filename>.
Factory Default Settings
Specify the factory default setting with the following options.
Option Value
dpitch= <value>
dpointsize= <value>
GL-10x0 Administrator's Guide
Inserter Paper Orientation Option
Selects face up orientation for inserter paper.
Selects face down orientation for inserter paper.
Tabbed Paper Source Options
Selects the lower tray for tabbed paper stock
Selects the bypass tray for tabbed paper stock
Factory Default Setting Options
Description
Set the pitch to <value>. The range available is
default is
.
12.00
Set the point size to <value>. The range available is
The default is
.
10.00
Description
Description
to
. The
0.44
99.99
to
.
4.00
999.75
193