5
Next, you are prompted to select the components you want to install.
By default, both the GL Fax Driver and Address Book are selected. If
you deselect a component, you can always install it at a later time by
running Setup.exe again.
6
Click
7
Enter the path to the controller on the network:
For example, enter \\<Mygl1010>\DSSC where <Mygl1010> is the
name of the device or click
8
Click
9
Next, you are prompted to enter the name of the program folder in
which you want the software copied. Accept the default, TOSHIBA
e-STUDIO GL-Fax and Address Book, or enter a new program folder.
GL-10x0 Administrator's Guide
The Component Location Prompt
to continue.
Next
The Controller Path Prompt
to continue.
Next
to locate the device on the network.
Browse
13