Toshiba GL-1010 Administrator's Manual page 53

Configuring the Ethernet Speed Settings
1 From the Network Setting menu, press
Setting screen.
2 Set the network speed to 10
to automatically sense and set the correct speed.
3 Press
Configuring AppleTalk Protocol Settings
1 From the Network Setting menu, press
AppleTalk Setting screen.
Note: Currently, the controller supports EtherTalk access only;
TokenTalk is not supported.
GL-10x0 Administrator's Guide
Ethernet Setting Screen
to save your setting.
OK
AppleTalk Setting Screen
ETHERNET
or 100 . Alternatively, select
/ /
MB S MB S
APPLETALK
to open the Ethernet
AUTO
to open the
31