Toshiba GL-1010 Administrator's Manual page 351

Possible Cause
Incompatible
network protocol
setup
User's network
protocols do not
include the protocol
configured for the
controller
Faulty or missing
NIC or network cable
GL-10x0 Administrator's Guide
Cannot Find the Controller (Continued)
Check
3 Print a configuration page.
Make sure there are no
discrepancies or
inconsistencies between the
controller settings and your
network settings. Change
the settings, if necessary.
Use the Find Computer
utility from your Windows
workstation to locate the
controller by its device
name. Can you find the
controller?
4 Can you locate other
workstations that are in the
same network as the
controller?
5 Check link LED activity on
the hub, the NIC of the
controller, and the client
machine. Do the hardware
components appear to be
functioning properly?
For Instructions,
Yes No
End Next To change the protocol
Step setup, refer to
Modifying Protocol
Settings Locally
page 26. Once you find
the controller, configure
the port so that it is
mapped correctly to
the device.
Next Check the network
Step settings on the client
workstation to make
sure they are
compatible with the
controller protocol
settings.
Next Contact your Toshiba
Step authorized dealer for
support.
Go To...
on
329