Toshiba GL-1010 Administrator's Manual page 141
Toshiba gl-1010 office mfp
Hide thumbs
Also See for GL-1010:
- Operator's manual (126 pages) ,
- Network fax manual (98 pages) ,
- Network fax operators manual (88 pages)
Table of Contents
Advertisement
Enabling/Disabling the Wireless Card
If you are using the wireless network for any network traffic involving the
controller, you must enable the wireless NIC on the controller. The
wireless NIC is enabled by default. If you are not using the wireless
network for any network traffic, disabling the wireless NIC on the
controller reduces overhead and improves efficiency.
1
Log in as an administrator.
2
On the Administration tab, click the
3
Click the
4
In the Device area, click the
5
Select
6
Click
Configuring IPX/SPX Settings
If you are using the IPX/SPX networking protocol for any wireless
network traffic involving the controller, you must enable the IPX/SPX
protocol on the wireless NIC. The IPX/SPX protocol is enabled by default.
If you are not using IPX/SPX for any wireless network traffic, disabling
the IPX/SPX protocol on the wireless NIC reduces overhead and improves
efficiency.
Administrator's Guide
GL-10x0
Wireless Network
Wireless Network Page
or
.
Enable
Disable
.
Save
subtab.
Setup
link. The Wireless Network page opens.
drop-down list.
Wireless Card
119
Advertisement
Table of Contents
Troubleshooting
