Toshiba GL-1010 Administrator's Manual page 209

In PostScript,
has priority over the media type and the paper source. In PCL5e the paper
size always has priority over the media type and the paper source.
If this option is not specified, the default value is used.
Example: The command to specify letterhead media type is lp –o
mtype=Letterhead
Duplexing
The current duplex mode can be specified using the following options.
Option Value
simplex
duplex
sduplex
If this option is not specified, the default value simplex is used.
You do not have to specify duplexing for
duplexing separately can override the booklet mode setting for duplexing.
Example: The command to specify long edge duplexing is lp –o duplex
<filename>.
Paper Sizes
Specify the paper size using the following options.
Option Value Alternate Value Description
letter
A4
legal
statement
GL-10x0 Administrator's Guide
Deferred Media Selection
<filename>.
Duplexing Options
Alternate Value Description
lduplex
duplex_long
duplex=long
hduplex
duplex_short
duplex=short
vduplex
Paper Size Options
lt, LT
A4
lg, LG
st, ST
is always turned on so the paper size
Turns duplexing off.
Turns duplexing on with long edge binding.
Turns duplexing on with short edge binding.
Booklet Mode
Select letter size paper.
Select A4 size paper.
Select legal size paper.
Select statement size paper.
(sduplex). Setting
187