Toshiba GL-1010 Administrator's Manual page 201

filter. This file is installed in /opt/toshiba/tap/bin/lpLinux.sh.
A symbolic link to this file is installed in the /usr/local/bin
directory as lptap.
gl10X0Backend (AIX filter only): This is an executable program called
by the AIX qdaemon. It receives the arguments from the qdaemon,
interrogates it for copy information etc., then calls the queue copy of
net_gl10X0 to run the print. This program is installed in /opt/
toshiba/tap/bin/gl10X0Backend.
gl10X0add: This file is a shell script used to create a printer
description. This file is installed in /opt/toshiba/tap/bin/
gl10X0add. A symbolic link is installed in the /bin directory that
points to the location of this file.
gl10X0rm: This file is a shell script used to remove a printer
description. This file is installed in /opt/toshiba/tap/bin/
gl10X0rm. A symbolic link is installed in the /bin directory that
points to the location of this file.
net_gl10X0.1: This is an input file for the man command that
supplies online documentation for the controller-specific options.
This file is installed in /opt/toshiba/tap/man/man1/
net_gl10X0.1. A symbolic link is installed in the /usr/man/man1
directory that points to the location of this file.
TAR File Setup
1 Insert the Admin's Client CD-ROM into the CD-ROM drive.
2 Log on to the root account and copy the tar file into the root folder.
The TAR file for each operating system is provided in the following
folder:
3 Enter the following commands and verify the correct output:
GL-10x0 Administrator's Guide
Solaris: <CD-ROM>:\SolarisFilter\Usa\
HP-UX: <CD-ROM>:\HP-UXFilter\Usa\
AIX: <CD-ROM>:\AIXFilter\Usa\
Linux: <CD-ROM>:\LinuxFilter\Usa\
Open Unix: <CD-ROM>:\OpenUnixFilter
Solaris: uname -a
Expected ouput: SunOS
HP-UX: uname -a
Expected output: HP-UX
IBM AIX: uname -a
Expected output: AIX
179