Toshiba GL-1010 Administrator's Manual page 403

Term
Scheduled print
Shared key
authentication
Sheet insertion
Simplex
SMTP
SNMP
SPX
SSID
Subnet
Subnet mask
System
administrator
Administrator's Guide
GL-10x0
Definitions of Common Terms
Definition
A printing mode that allows you to delay printing a queued job until a
specific date and time.
In wireless networking, an authentication mode that requires the WEP
keys of the client and the access point to match for authentication to
occur.
A feature where a blank page is printed in between designated pages
of the original document. Insertion sheets are stapled with the original
document (if stapling is requested). See also Page Interleaving.
Printing on only one side of a piece of paper. See also Duplex.
Simple Mail Transfer Protocol. A protocol used for delivering e-mail to
a server. Another protocol, usually POP3, must be used to access and
read the messages.
Simple Network Management Protocol. A widely used network
monitoring and control protocol. Data is passed from SNMP agents,
which are hardware and/or software processes reporting activity in
each network device (hub, router, bridge, etc.) to the workstation
console used to oversee the network. The agents return information
contained in a MIB (Management Information Base), which is a data
structure that defines what is obtainable from the device and what can
be controlled. Originating in the Unix community, SNMP has become
widely used on all major platforms.
Sequenced Packet Exchange. The transport level protocol used by
Novell NetWare.
Service Set Identifier. The identification code for a specific wireless
network.
A section within a network.
A number that identifies a subnetwork so that an IP address can be
shared by the local network.
The person who is responsible for configuring TopAccessComposer
and other system components for use. The system administrator is
also responsible for storing documents in the Department folder for
other users to view and print.
381