Toshiba GL-1010 Administrator's Manual page 187

Prerequisites
Install NDPS in the NetWare servers. NDPS comes with NetWare 5, but it
is not installed automatically. The NDPS install program extends the NDS
schema for three NDS objects:
NDPS manager (M)
NDPS broker (B)
NDPS printer agent (P)
To load the TOSHIBA NDPS gateway on NW4, besides loading
CLIBAUX.NLM, you need to have the Novell new localization conversion
tables installed in SYS:\SYSTEM. You can find these files in the latest
support pack 8a for NetWare 4.11 or 4.2. After you extract the support
pack compressed file, you must copy the UNI*.NLM files and
LOCNLM32.NLM to the SYS:\SYSTEM directory on the server.
Setup
1 Insert the e-STUDIO Admin's Client CD-ROM into the CD-ROM drive
on the administrative workstation.
2 Copy tndps.exe, the self-extracting executable file from the CD-ROM
to the workstation. Double-click the file to launch the InstallShield
setup program.
3 Follow the Setup Wizard prompts to supply the server volume or
Browse
4 Click
5 Reboot the NetWare server.
At this point, you can configure the controller as an NDPS object.
Setting up the Controller as an NDPS Object
Considerations and Limitations
The TOSHIBA NDPS gateway should automatically discover the
controller. If not, manually create a new NDPS printer agent. (See
a Printer Agent
Prerequisites
1 Load NWADMN32.EXE on the administrator workstation to launch
the NetWare administration program.
2 Determine the
agent.
Administrator's Guide
GL-10x0
to select a mapped drive.
to proceed with installation.
Next
on page 166.)
or
Tree Context
under which to install the NDPS printer
Create
165