Partial, Blank, Or Blurry Pages - Toshiba GL-1010 Administrator's Manual

the queue. Banner pages are configured to print on either letter or A4
sized paper only.
Corrective Action
1 No corrective action required.
2 Enable Banners through the Printer Settings dialog box.
3 Manually insert the correct media type at the copier.
Banner Page Listed as Separate Job in Queue
Problem Description
When you view the jobs queue from the copier LCD touch screen, two
separate jobs are listed for one job sent.
Corrective Action
This is expected behavior. The banner page is sent as a separate print job
so that output options applied to the print job are not applied to the
banner page as well. Otherwise, the banner pages would be stapled to the
remainder of the job, and multiple copies of a job would produce multiple
copies of the banner page. In duplex printing, the banner page would be
the first page with page 1 of the document printed on the back, and so on.
The banner page portion of the print job appears in the job list with
Banner preceding the job name so that you can tell which job it is
associated with.

Partial, Blank, or Blurry Pages

Blank Page Printed After Each Job
Problem Description
This results when the
Settings dialog box (Novell printing only).
Corrective Action
Deselect the
may be enabled through the Novell network setup. Use NWAdmin to
check the settings and modify them as necessary.
356
Form Feed
printer setting. If the problem persists, form feed
Form Feed
option is enabled in the driver Printer
GL-10x0 Administrator's Guide