Toshiba GL-1010 Administrator's Manual page 171
Toshiba gl-1010 office mfp
Hide thumbs
Also See for GL-1010:
- Operator's manual (126 pages) ,
- Network fax manual (98 pages) ,
- Network fax operators manual (88 pages)
Table of Contents
Advertisement
7
Scroll down to the bottom of the page and click
settings.
Alternatively, click
previous values.
8
Reboot the controller for the changes to take effect.
Configuring SMB Settings
1
Log in as an administrator.
2
On the Administration tab, click the
3
Click the
4
In the SMB area of the Wireless Network page, click the
down list.
5
Select
6
In the
7
Enter the controller
8
Enter the address of the
9
Enter a
10 To set the controller as a master browser, click the
down list and select
11 Click
Configuring AppleTalk Settings
1
Log in as an administrator.
2
On the Administration tab, click the
3
Click the
4
In the AppleTalk area, click the
5
Select
6
Enter the
7
Click
Configuring the Wireless NIC Settings
1
Log in as an administrator.
2
On the Administration tab, click the
3
Click the
Administrator's Guide
GL-10x0
Reset
Wireless Network
to enable the SMB protocol.
Enable
field, enter the controller name.
Device Name
Workgroup
for the controller.
WINS Scope ID
Enable
.
Save
Wireless Network
to enable AppleTalk.
Enable
AppleTalk Zone
.
Save
Wireless Network
to reset all settings on this page to their
Setup
link. The Wireless Network page opens.
.
Primary WINS Server
.
Setup
link. The Wireless Network page opens.
drop-down list.
Protocol
string.
Setup
link. The Wireless Network page opens.
to save your
Save
subtab.
Protocol
.
Master Browser
subtab.
subtab.
drop-
drop-
149
Advertisement
Table of Contents
Troubleshooting
