Toshiba GL-1010 Administrator's Manual page 212

When the
set to the same size as for
A3, A4, B4, letter, and ledger paper sizes.
If booklet mode is selected, then duplexing is also selected automatically
(sduplex). Setting duplexing separately can override the booklet mode
setting for duplexing.
Example: The command to select letter size paper for booklet printing
mode is lp –o booklet=letter <filename>.
Page Layout
Select the booklet mode page layout using the following options.
Option Value Alternate Value Description
left2right= off
left2right= on
If
left2right=off
short edge binding is used.
Example: The command to select left to right page layout for booklet
printing mode is lp –o left2right=on <filename>.
190
option is selected, the paper size is automatically
Booklet Mode
Booklet Mode Page Layout Options
OFF
ON
then long edge binding is selected, otherwise if
. This function is only available for
Booklet Mode
Select right to left page layout for booklet printing mode.
If this value is set to
as shown in the figure below.
Right to Left
Select left to right page layout for booklet printing mode.
This is the default setting.
If this value is set to
from as shown in the figure below.
Left to Right
then the layout of the pages is
Off
then the layout of the pages is
On
GL-10x0 Administrator's Guide
left2right=on