Installing Windows Software - Toshiba GL-1010 Administrator's Manual

Installing Windows Software

The client software includes the TopAccessDocMon print job monitoring
utility, printer drivers for PCL and PostScript (PS), the GL TWAIN Driver,
and the AGFA Font Manager.
Considerations and Limitations
The TopAccessDocMon utility monitors only GL-1020, GL-1010, and
SC-2 devices. It does not support any third party printer drivers.
TopAccessDocMon cannot locate or interrogate the controller if it has
been set up as a NetWare NDPS printer or NPRINTER.
You must install a printer driver and map it to the controller to access
it using TopAccessDocMon.
You can view all jobs in the print queue, including controller-resident
jobs, but can only delete your own jobs.
Prerequisites
Make sure that the client workstation meets the following minimum
requirements:
Windows 98
Windows Me
Windows NT 4.0
230
Novell Client v3.4 or higher and Client Service Pack 1 are
required to run IPX-based SNMP access and Novell printing.
The Microsoft Client for NetWare can replace the Novell Client
except for NDPS printers.
Novell Client v3.4 or higher is required to run IPX-based SNMP
access and Novell printing.
The Microsoft Client for NetWare can replace the Novell Client
except for NDPS printers.
Microsoft Service Pack 6A or higher
Novell Client v4.9 SP1a or higher with Z.E.N works Starter Pack
and Service Pack 1 are required to run IPX-based SNMP access
and Novell printing.
The Microsoft Client for NetWare can replace the Novell Client
except for NDPS printers.
GL-10x0 Administrator's Guide