Toshiba GL-1010 Administrator's Manual page 379

Incomplete or Partial Pages Print
Problem Description
Most likely, this occurred because the
Use Adobe Document Structuring
option was disabled. This feature is turned on as a default
Convention
setting. If a user has deselected it, they may find that partial pages are
printed or have problems with the document printing completely,
especially if it is interrupted by other print jobs. It is best to use the
setting when printing complicated PostScript print jobs, as the driver
creates independent information for each page to assure the integrity of
the printed document.
Corrective Action
From the driver PostScript properties sheet, enable the
Use Adobe Document
option.
Structuring Convention
Wrong Fonts Print
Problem Description
The document fonts are not available on the controller.
Corrective Action
Check the Fonts properties sheet to make sure the
Use Device TrueType Fonts
check box is deselected. While using the printer fonts results in quicker
printing time, the output may not look like it does on the screen.
Alternatively, if you are using the PostScript driver, you can still enjoy the
speed benefits of using the device fonts while controlling the appearance
of the output. Using the Font Substitution table, you can define which
printer font is substituted for each TrueType font used in your document.
Refer to the driver online Help for more information.
Truncated Output
Problem Description
When printing a PostScript file from a Macintosh to the controller via a
Novell queue, the output is truncated or is not printed at all. This may
result if binary communications is enabled for the spooler. The controller
does not support binary communications for PostScript printing.
GL-10x0 Administrator's Guide 357